The UC77 Glass to Wall Clamp is designed to secure glass panels to the walls of your shower enclosure. This clamp mounts directly to the wall, ceiling or floor to secure fixed glass panels.

For 3/8" glass

The UC79 Glass to Wall Clamp is designed to secure glass panels to the walls of your shower enclosure. This is an oversized version of the standard UC77 Clamp. It is especially recommended for 1/2" thick glass installations.

For 3/8" and 1/2" thick glass

The SCU4 Square Styled Wall Mount Heavy-Duty Glass Clamp is designed to secure glass panels to the walls of your shower enclosure. This clamp mounts directly to the wall, ceiling or floor to secure fixed glass panels.

For 3/8" and 1/2" thick glass

The GCB90 is a 90° Glass-to-Glass clamp used to connect two fixed glass panels meeting at a 90° angle. It can also be used as a bracket for horizontal glass shelves. Clamp design allows for flush mounting of shelf to wall, or for adjoining panels to meet with a minimal gap.

For 3/8" thick glass

The GCB135 is a 135° Glass-to-Glass clamp used to connect two fixed glass panels meeting at 135°. These 135° Glass Clamps have attractive mitered edges, and will match hinges offering a similar design.

For 3/8" and 1/2" thick glass

The GCB184 Double Stud Glass Clamp allows two inline glass panels to be connected together. A hole through each piece of glass provides extra stability and security.

For 3/8" and 1/2" thick glass

The SOGC135 is used to fasten two glass panels. It can also be used to secure the glass panels in position while the applied silicone sealant in the joint cures. They are secured in place by nylon tipped Allen screws.

Note: These Clamps are not designed to take the place of Headers or a Support Bar.

For 3/8" and 1/2" thick glass

The SOGC90 is used to fasten two glass panels. It can also be used to secure the glass panels in position while the applied silicone sealant in the joint cures. They are secured in place by nylon tipped Allen screws.

Note: These Clamps are not designed to take the place of Headers or a Support Bar.

For 3/8" and 1/2" thick glass

Movable Wall Mounted Transom Clamps can be used to pivot transom panels above the shower door. Wall Mount and Glass-to-Glass Clamps can be used in any combination, depending upon the configuration of the enclosure.

For 3/8" and 1/2" thick glass

This Movable Glass-to-Glass Transom Clamp can be used to pivot transom panels above the shower door. Wall Mount and Glass-to-Glass Clamps can be used in any combination, depending upon the configuration of the enclosure.

For 3/8" and 1/2" thick glass

These 135° Movable Transom Clamps are used to connect two fixed glass panels meeting at 135°. They have attractive mitered edges, and will match hinges offering a similar design.

For 3/8" and 1/2" thick glass

U-Channels are used to secure fixed panels to the floor, walls or ceiling of the shower enclosure.

Available in 3/8" and 1/2"

The Deluxe Header Kit is designed to provide additional support for glass panels not reaching the ceiling.

Each Deluxe Header Kit contains:

Header extrusion of 66", 98" or 144"
36" Piece of Snap-In Filler for Door Pocket
Vinyl for 3/8" Glass [not needed for 1/2" Glass]
2 BWB2 Brass Wall Mounting Brackets

Glass to Wall Clamps

Glass to Glass Clamps

Movable Transom Clamp

Other Support Options